Disassembly

Part Two - Reels & Back Bracket Assembly

gallery/BACK-PART-ONE
gallery/NEXT-PART-THREE
Unhook the Payout Cam Bracket Spring from the Payout Pin Assembly.
Unscrew the domed machine screw, and remove the Payout Stopper Bracket from the Front Frame Assembly.
Unhook the Clock Arm Cam Lever Spring from the hook on the Clock Arm Cam Lever Assembly.
Unscrew the two domed machine screws, and remove the Money Bowl Cover, from the Base Casting.
Unthread the Clock Arm Cam Lever Spring from the Money Bowl Cover.
Unhook the Spring Hook from the Reel Kicker Mechanism Assembly.
...So that the Shoulder Screw is accessible.
Unscrew the Shoulder Screw from the Clock Arm Cam Lever Assembly.
Unscrew and remove the countersunk machine screw from the Front Frame Assembly, securing the Rectangle Guide Bar.
Then unhook the Reel Spin Spring from the stud on the Back Bracket Assembly.
Unthread the Spring Hook from the Reel Spin Spring.
Unscrew the two nuts, and remove the Reset Lever Guide Bracket from the Back Bracket Assembly.
Remove the Back Bracket Stud, with attached Payout Cam Bracket Spring, from the Back Bracket Assembly, ensuring to recover the Sleeve Plate Spring, normally sandwiched between the Back Bracket Stud and the Back Bracket Assembly.
Unthread the Back Bracket Stud from the Payout Cam Bracket Spring.
Unscrew the countersunk screw securing the Reel Shaft to the Front Frame Assembly, but do not remove.
Slide the Payout Cam Bracket Slider along the Rectangle Guide Bar...
...So that the rod of the Payout Pin Assembly clears the payout holes in the reels.
Pull the Reel Shaft away from the locating slot on the Back Bracket Assembly, and remove the three washers, the Reel Kicker Mechanism Assembly, the Reel Shaft Sleeve, the Spacer, the 3rd Reel Assembly, and the 2nd Reel Assembly.
Unhook the Reel Kicker Spring from the Kicker Stud.
Unscrew the domed machine screw from the Reel Kicker Bar, and remove the Washer, the Reel Kicker, the Washer, and the Kicker Shaft Spacer.
Unthread the Reel Kicker Spring from the Reel Kicker Mechanism Assembly.
Unscrew the Kicker Stud from the Reel Kicker.
Remove the Reel Shaft.
Fully unscrew and remove the countersunk screw on the end of the Reel Shaft, and remove the Spacer Sleeve, the two washers, and the 1st Reel Assembly.
Unscrew and remove the lock nut from the Kicker Stopper Assembly on the Back Bracket Assembly.
Unscrew and remove the Kicker Stopper Assembly  from the Back Bracket Assembly.
Unscrew the two domed machine screws, and remove the Slider Guide Bracket from the Back Bracket Assembly.
Unscrew and remove the domed machine screw from the Back Bracket Assembly, securing the Rectangle Guide Bar.
Unscrew the three countersunk machine screws, and remove the Back Bracket Assembly from the Base Casting.
Slide the Payout Cam Bracket Slider along the Rectangle Guide Bar...

37

38

39

40

41

42

43

44

45

46

47

48

50

51

49

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

Unscrew the Domed Machine Screw (with lockwasher), and remove the Payout Stopper Bracket (C6) from the Front Frame Assembly (C7).

Unscrew the two Domed Machine Screws (with lockwashers), and remove the Money Bowl Cover (B7), from the Base Casting (B19).

Then unhook the Reel Spin Spring (K4) from the stud on the Back Bracket Assembly (G9).

Unthread the Spring Hook (K3) from the Reel Spin Spring (K4).

Unscrew the two nuts (with lockwashers), and remove the Reset Lever Guide Bracket (G6) from the Back Bracket Assembly (G9).

Remove the Back Bracket Stud (G2), with attached Payout Cam Bracket Spring (K5), from the Back Bracket Assembly (G9), ensuring to recover the Sleeve Plate Spring (G5), normally sandwiched between the Back Bracket Stud (G2) and the Back Bracket Assembly (G9).

Unscrew the countersunk screw securing the Reel Shaft (J1) to the Front Frame Assembly (C7), but do not remove.

...So that the rod of the Payout Pin Assembly (E7) clears the payout holes in the reels.

Pull the Reel Shaft (J1) away from the locating slot on the Back Bracket Assembly (G9), and remove the three washers, the Reel Kicker Mechanism Assembly (G3), the Reel Shaft Sleeve (G1), the Spacer (J8), the 3rd Reel Assembly (J7), and the 2nd Reel Assembly (J6).

Unscrew the Domed Machine Screw (with lockwasher) from the Reel Kicker Bar, and remove the Washer, the Reel Kicker (G10), the Washer, and the Kicker Shaft Spacer (G11).

Unscrew the Kicker Stud (G12) from the Reel Kicker (G10).

Remove the Reel Shaft (J1).

Fully unscrew and remove the countersunk screw on the end of the Reel Shaft (J1), and remove the Spacer Sleeve (J2), the two washers, and the 1st Reel Assembly (J3).

Unscrew and remove the lock nut (with lockwasher) from the Kicker Stopper Assembly (G8) on the Back Bracket Assembly (G9).

Unscrew and remove the Kicker Stopper Assembly (G8)  from the Back Bracket Assembly (G9).

Unscrew the two Domed Machine Screws (with plain washers), and remove the Slider Guide Bracket (G7) from the Back Bracket Assembly (G9).

Unscrew and remove the Domed Machine Screw from the Back Bracket Assembly (G9), securing the Rectangle Guide Bar (E6).

Unscrew the three Countersunk Machine Screws, and remove the Back Bracket Assembly (G9) from the Base Casting (B19).

...So that the Shoulder Screw (E4) is accessible.

Unscrew and remove the Countersunk Machine Screw from the Front Frame Assembly (C7), securing the Rectangle Guide Bar (E6).

gallery/Dis-Part-One-Off
gallery/Dis-Part-Two-On
gallery/Dis-Part-Three-Off
gallery/Dis-Part-Four-Off
Remove the Rectangle Guide Bar and the Payout Cam Assembly.

67