Disassembly

Part Three - Operating & Coin Mechanisms

gallery/Dis-Part-One-Off
gallery/Dis-Part-Two-Off
gallery/Dis-Part-Three-On
gallery/Dis-Part-Four-Off
Unscrew and remove the four domed machine screws, securing the Payout Cam Assembly to the Payout Cam Bracket Slider...
There maybe thin washers sandwiched between the two parts to aid movement on the Rectangle Guide Bar, so take care to recover these.
Remove the Split Pin securing the Payout Pin Bracket Shaft to the Payout Pin Assembly.
gallery/BACK-PART-TWO
gallery/NEXT-PART-FOUR
...Ensuring the washers are recovered, and remove the Clock Arm Cam Lever Assembly.
Unscrew the two domed machine screws, and remove the Latch Arm Assembly from the Clock Arm Cam Lever Assembly.
Withdraw the Payout Pin Bracket Shaft, to separate the Payout Pin Assembly from the Payout Cam Bracket Slider, ensuring the Payout Pin Torsion Spring is recovered.
Unscrew the lock nut and two domed machine screws, and remove the Payout Pin Bracket Tip from the Payout Pin Assembly.
Unscrew the two domed machine screws, and remove the Payout Safety Bracket from the Payout Cam Assembly.
Unscrew the domed machine screw, and remove the Payout Cam from the Payout Cam Assembly.
Unscrew and remove the three countersunk machine screws, securing the Front Frame Assembly to the Base Casting.
Remove the Front Frame Assembly, with Coin Guide Chute and Coin Chute & Mechanism Assembly attached, by pulling away from the lip of the coin return tray, and lifting straight up.
Unscrew the two domed machine screws, and remove the Coin Guide Chute from the Front Frame Assembly.
Unscrew the two domed machine screws, and remove the Coin Chute Mounting Bracket from the Front Frame Assembly, ensuring to recover the Lock Lever Spring.
Remove the Lock Lever Assembly from the Lock Lever Shaft Assembly.
Unhook the Lock Lever Arm Spring from the Lock Lever Assembly, and unthread from the pivot housing.
Unscrew the domed machine screw, and remove the Lock Lever Shaft Assembly from the Front Frame Assembly.
Unscrew the countersunk machine screw, and remove the Coin Chute & Mechanism Assembly from the Front Frame Assembly.
Unscrew the domed machine screw from the Coin Chute Assembly, and remove the Lock Plate from the Detector Magnet Assembly.
Unscrew the Shoulder Screw, and remove the Spin Reset Lever Assembly.
Remove the Detector Magnet Assembly.
Unscrew the two domed machine screws, and remove the Stopper Lever Reset Assembly.
Unhook the Overflow Push Lever Spring from the hook on the Stopper Lever Reset Assembly.
Withdraw the Coin Overflow Push Lever from the Stopper Lever Reset Assembly.
Unthread the Overflow Push Lever Spring from the Coin Overflow Push Lever.
Unscrew the domed machine screw, and remove the Slider Roller Bracket Assembly.
Unhook the Cam Lever Dog Spring from the hook on the Slider Stopper.
Unscrew the domed machine screw, and remove the Slider Stopper and the Cam Lever Dog Assembly.
Unthread the Cam Lever Dog Spring from the Cam Lever Dog Assembly.
Unscrew the countersunk machine screw, and remove the Slug Stopper and the Coin Guide Spring.
Unthread the Slider Dog Spring, from the Slider Dog and the Coin Chute Assembly.
Remove the Coin Slider from the Coin Chute Assembly by pulling out...
...Paying attention to lever the sprung Slider Stop clear.
Unscrew the domed machine screw from the Clock Arm Cam Lever Assembly...

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

Unscrew and remove the four Domed Machine Screws (with lockwashers), securing the Payout Cam Assembly (E3) to the Payout Cam Bracket Slider (E1).

Remove the Split Pin securing the Payout Pin Bracket Shaft (E5) to the Payout Pin Assembly (E7).

Unscrew the Lock Nut and two Domed Machine Screws (with lockwashers), and remove the Payout Pin Bracket Tip (E8) from the Payout Pin Assembly (E7).

Unscrew the two Domed Machine Screws (with lockwashers and plain washers), and remove the Payout Safety Bracket (E12) from the Payout Cam Assembly (E3).

Unscrew the Domed Machine Screw (with lockwasher and plain washer), and remove the Payout Cam (E13) from the Payout Cam Assembly (E3).

Unscrew and remove the three Countersunk Machine Screws, securing the Front Frame Assembly (C7) to the Base Casting (B19).

Remove the Front Frame Assembly (C7), with Coin Guide Chute (C5) and Coin Chute & Mechanism Assembly (D) attached, by pulling away from the lip of the coin return tray, and lifting straight up.

Unscrew the two Domed Machine Screws (with lockwashers), and remove the Coin Guide Chute (C5) from the Front Frame Assembly (C7).

Unscrew the two Domed Machine Screws (with lockwashers), and remove the Coin Chute Mounting Bracket (K6) from the Front Frame Assembly (C7), ensuring to recover the Lock Lever Spring (K7).

Unhook the Lock Lever Arm Spring (C3) from the Lock Lever Assembly (C4), and unthread from the pivot housing.

Unscrew the Domed Machine Screw (with lockwasher), and remove the Lock Lever Shaft Assembly (C2) from the Front Frame Assembly (C7).

Unscrew the Countersunk Machine Screw, and remove the Coin Chute & Mechanism Assembly (D) from the Front Frame Assembly (C7).

Unscrew the Domed Machine Screw (with split washer) from the Coin Chute Assembly (D1), and remove the Lock Plate (D15) from the Detector Magnet Assembly (D2).

Unscrew the Shoulder Screw (D7, with plain washer), and remove the Spin Reset Lever Assembly (D6).

Unscrew the two Domed Machine Screws (with lockwasher on longest screw), and remove the Stopper Lever Reset Assembly (D9).

Unscrew the Domed Machine Screw (with lockwasher), and remove the Slider Roller Bracket Assembly (D10) (later models only, earlier models had this incorporated into the Coin Slider).

Unhook the Cam Lever Dog Spring (D5) from the hook on the Slider Stopper (D4).

Unscrew the Domed Machine Screw (with lockwasher and split washer), and remove the Slider Stopper (D4) and the Cam Lever Dog Assembly (D13).

Unscrew the Countersunk Machine Screw, and remove the Slug Stopper (D8) and the Coin Guide Spring (D12).

Unthread the Slider Dog Spring (D3), from the Slider Dog and the Coin Chute Assembly (D1).

Remove the Coin Slider from the Coin Chute Assembly (D1) by pulling out...

...Paying attention to lever the sprung Slider Stop clear (viewed from underneath).

Please note: On early models, ignore paragraphs 96 & 97 - the Coin Slider cannot be removed from the Coin Chute Assembly (D1) due to the Slider Roller Bracket Assembly (D10) being incorporated into the Coin Slider.

Unscrew the Domed Machine Screw (with lockwasher) from the Clock Arm Cam Lever Assembly (E11)...

...Ensuring the washers are recovered, and remove the Clock Arm Cam Lever Assembly (E11).

Unscrew the two Domed Machine Screws (with lockwashers), and remove the Latch Arm Assembly (E10) from the Clock Arm Cam Lever Assembly (E11).

Unscrew the Domed Machine Screw (with lockwasher), and remove the Payout Lever Reset Cam (E9) from the Latch Arm Assembly (E10).

Unscrew the domed machine screw, and remove the Payout Lever Reset Cam from the Latch Arm Assembly.

101

There maybe thin washers sandwiched between the two parts to aid movement on the Rectangle Guide Bar, so take care to recover these.